Zha Ts011f Problem With Wrong Ac Current Divisor Zigbee Home Hello, i am quite new to home assistant. i recently bought the following sockets in china: ts011f tz3000 okaz9tjs. they worked perfectly and i ordered some more. with the new sockets, the current is now too high by 1000. i then downloaded the diagnostic information for both sockets and found that the old socket had the following is there a way to simply change the value on the new socket from. I've just updated to home assistant core version core 2021.11.0b0 and zha device handlers version 0.0.63. mine version of the device is ts011f tz3000 cphmq0q7.
Zigbee Zha Error Situation Zigbee Home Assistant Community Hi all, i had a problem with my tuya zigbee plug ts011f that turned off randomly by itself. i spent some time to find why and to fix it. i ended up updating the firmware via an zha ota update which removed completely the problem. i wrote a post in the homeassistant community forum with the steps i followed. hope this can save somebody's time. community.home assistant.io t zha ota. I have exactly the same issue with 2 of such plugs, 1 20a ts011f by tz3000 cehuw1lw and a 16a ts011f by tz3000 typdpbpg. they were originally paired in zha with a zigbee cc2531 usb stick, but i migrated last month the radio to a sonoff zigbee hub running tasmota and after removing these plugs from home assistant i can’t get them paired again. Previously i had issues with my ts011f by tz3000 okaz9tjs tuya plug not showing the correct values the issues were resolved here (#1764) by adding quirks. now i have another issue the energy m. I have bought 2 fdtek power plugs. they will be shown in zha as “ts011f von tz3000 rdfh8cfs”. both plugs report “electrical measurement” correct (as long as i can judge it), but “electrical measurement rms voltage” and “electrical measurement rms current” show weird values, maybe the multiplication factors are swapped. but one plug does not show “smart energy metering.
Zigbee Zha Error Situation Zigbee Home Assistant Community Previously i had issues with my ts011f by tz3000 okaz9tjs tuya plug not showing the correct values the issues were resolved here (#1764) by adding quirks. now i have another issue the energy m. I have bought 2 fdtek power plugs. they will be shown in zha as “ts011f von tz3000 rdfh8cfs”. both plugs report “electrical measurement” correct (as long as i can judge it), but “electrical measurement rms voltage” and “electrical measurement rms current” show weird values, maybe the multiplication factors are swapped. but one plug does not show “smart energy metering. Hi! i've bought those ts011f tuya plugs. they are also zigbee routers, and have energy meters. i connected one to the washing machine, and it connecetd to my conbee 2, with zha. after some time, it stops working after some minutes (on off switch, the meters never worked), and it never reports anything. if i connect it anywhere else, everything works. the other one, on the right, works. when i. Problem description i bought some aliexpress zigbee smart plugs awhile ago and they worked mint right out of the box. i decided to get some more and when the new plugs where paired the energy metering current and (assuming therefore) kwh values were off by 1000x.
Zha Zigbee Switches Are Not Shown Zigbee Home Assistant Community Hi! i've bought those ts011f tuya plugs. they are also zigbee routers, and have energy meters. i connected one to the washing machine, and it connecetd to my conbee 2, with zha. after some time, it stops working after some minutes (on off switch, the meters never worked), and it never reports anything. if i connect it anywhere else, everything works. the other one, on the right, works. when i. Problem description i bought some aliexpress zigbee smart plugs awhile ago and they worked mint right out of the box. i decided to get some more and when the new plugs where paired the energy metering current and (assuming therefore) kwh values were off by 1000x.
Zha Zigbee Switches Are Not Shown Zigbee Home Assistant Community